Lowara e-SHE e-SHS pump range

Comments 0 by in standard
June 30, 2015

Lowara pumps UK have recently introduced a new energy efficient 316 stainless steel flanged horizontal end suction pump range to supersede the ever popular SHE, SHS range.

These pumps are fitted with interchangeable mechanical seals in various material options to suit the liquid being pumped.

The pumps are also fitted with energy efficient IE3 electric motors over 7.5 Kw and fully comply with the latest Ecodesign Directive ( ErP ) having a MEI efficiency rating of 0.4 or above.

Pumps are available with 2900 rpm (2 pole) or 1450 rpm (4 pole) fixed speed motors, but can be fitted with Lowara’s Hydrovar variable speed inverter drive if required.

The e-SHE models have extended rotor shafts, but our preference, the e-SHS models have standard foot and flanged IE3 motors including WEG, which we keep a good selection of at our works in Leicester. Bare-shaft pumps and long coupled frame mounted units can also be supplied.

As a standard, all parts coming into contact with the liquid (wetted parts) are constructed from 316 stainless and feature a “back pull out” design for easy removal.

Stainless steel pumps offer a greater flexibility with the pumped media, meaning a far wider range of mildly aggressive liquids can be handled without detriment to the pump casing and impeller.

The previous SHS range has been widely used for pressure boosting, heating and air conditioning systems, washing duties, irrigation, simple liquid transfer, and now with the e-SHS upgrade to 316 stainless, mild chemicals can also be added to that list. Mechanical seal options include Carbon, Ceramic, Tungsten Carbide, Silicon Carbide, Nitrile, EPDM and FPM Viton (Reg trademark of DuPont). We can supply Lowara pump spares and seals for the entire pump range.

Lowara pumps

Lowara stainless steel pumps

Here we have a selection of photographs taken of one of the first 4 pole units to be manufactured by the Italian factory.

The model shown is an ESHS 32-250/07/X45RSNW and was supplied to a local customer to replace the older SHS4 32-250-07C pump that we supplied previously. We also supply pumps to customers throughout the mainland UK including Scotland and Wales.

The model codes have changed quite dramatically but this now gives us far more detailed information about the make up of the pump and electric motor. Please download the pdf data sheet for further details.

As Lowara pump distributors ( part of the Xylem group ) we are always available to help with specifying the best pump to suit individual customer requirements, and can specify impeller trims to meet duty point pumps. So please see our contact page for telephone numbers and email addresses, and as usual we welcome all your enquiries.

e-SH range